This is a two part item, consisting of a heavy duty printed handle, and an insert with your custom logo.
Stamp may be pressed in to soft soap by hand, or lightly taped with a rubber or wood mallet, or dead blow hammer. Metal hammers may cause cracking or chipping, and Melt and Pour soaps may be too hard for effective use.
Please contact me before ordering so I can determine if your logo or name can be made with this process. Thin lines or complex pictures can not be turned in to an emboss. Minimum line width is 0.42mm. Typical stamp depth is 1-1.5mm, but can range from 1-3mm. Deep stamps tend to grab the material, and may make a messy stamp.
With this order, you will need to send a good picture of your pre-approved logo. I’ll convert it to a 3D design, embed it in the insert, and print one copy for your use. Additional copies available for $10 each.
Custom colors available, if specified at order time. Re-prints in a new color are also available at $10 each, plus shipping.
Made out of food-safe PETG plastic
Typical colors available: black, white, red orange, yellow, green, blue, and purple. If not specified, parts will be printed in black or blue.
Note: For Cold or Hot Process soaps only. Not designed for food items. May not work on Melt and Pour soaps.
Product designed by Secret Mountain Soaps.